Description
Phoenix™ 2.5 (NSN: 5855-01-451-9877) is a programmable infrared signaling beacon designed for during low light operations. The 2.5 provides the ability to store two user defined six second encoded signals.
The first signal code is entered using the Phoenix 2.5 Program Controller (NSN:5855-01-452-0079). The first signal code is referred to as the command code and can only be entered or modified by the programmer. The command code is stored in a nonvolatile memory allowing the battery to be removed from the beacon without erasing the entered code. This code is the default code and is activated as soon as the battery is attached. This command code can also be used to store an emergency signal.
The second code is installed as needed by the user in the field. The operator programs a user defined flash pattern via two programming pins. Miniature indicator lights within the device will flash the pattern as it is being recorded by the user to confirm the code being stored. The stored program is easily erased by removing and reattaching the battery.
During operation, the user can reactivate the beacons miniature indicator lights at anytime allowing the operator to confirm the broadcast code in situations where their own night vision equipment has become lost or damaged.
Features
-
-
- Weight: 1 Ounce | 28 Grams
- Size: 1.24″ x 0.9″ x 0.574″ | 31mm x 22.5mm x 14.6mm
- Flash Cycle: 6 Seconds
- Flash Duration: Programmable
- Battery: Common 9 volt
- Configuration: 3 Light Emitting Diodes (LED)
- Coverage: 240 degrees x 360 degrees
- Switching: Attach or remove battery
- Operating Depth: The Poseidon – Phoenix / Pegasus Mounting Clip (902801) provides a water tight casing for the beacon and battery assembly. If immersed without the Poseidon case, the unit will continue to operate until the contacts fail due to water and electrolytic corrosion.
-
Reviews
There are no reviews yet.